The diesel air heater is to use the water circulation to heat the engine and the interior of the cab by burning the fuel of the vehicle, which can solve the problem of frost on the windows. It is an independent heating system with separate oil circuit, water circuit and electric circuit. In severe cold conditions, the engine can be heated up to 80 degrees, and the cab can be heated to 20 degrees, which means that not only the temperature in the cockpit is comfortable, but the vehicle engine is also warmed up.
1.High Quality Heater: This diesel air heater consumes 5KW power to immediately heat up your car. It can be used on cars with 12V or 24V Voltage. It can only start up with the diesel as the fuel, but it only makes low fuel consumption with 0.14-0.4L per hour.
2.Fast Heating: The combustion efficiency is high enough to achieve the effect of saving fuel while fast heating inside the vehicle. When the temperature is too high, it will automatically downshift. After the internal temperature return to normal, it will turn back to normal gear operation, safe operation.
3.Remote Control & LCD Display: Equipped with LCD display and remote control, you can adjust the temperature via the remote control or the LED monitor to warm up the car before getting in on a cold winter day.
4.Low Noise: The diesel heater is in a compact design and can be easily installed. Using the silent fan and the oil pump is made of upgraded low frequency pulse low vibration, effectively reduce noise. Keep the heater extremely quiet while running.
5.Easy to Operate: This type of heater is a separated design, each part need to be installed separately. This separated design diesel heater is suitable for small size vehicles, which will not take up much space.
6.Wild Applications: Diesel air heaters can be used to heat the cabs of various diesel mechanical vehicles, such as cars, trucks, RVs, trucks, construction vehicles, boats, RVs, buses, etc.
Use of fuel: diesel (Note: only diesel, gasoline or other can not)
Rated voltage: 12V & 24V universal
Lower/upper voltage: 10-14.5V (12V applicable), 20.5-28V (24V applicable)
Rated current: 2A
Starting current: 8-10A (12V), 4-5A (24V)
Switch type: LCD switch
Combustion consumption: 0.14 liters/hour in 1st gear - 0.4 liters/hour in highest gear
Overheat protection: 240℃
Heater/oil pump working temperature: -40℃ to 80℃
Working altitude: ≤1500M
Display screen: LCD
Fuel tank capacity: 10L
Air outlet: single hole
Function: Compared with the previous generation of products, the product has timing, constant temperature function, preset heating switch time through the timing function, and use the remote control to preheat the car (within 99 hours)
1 x heater
1 x silencer
1 x fixed plate
1 x remote control
1 x LCD display
1 x 10L tank
1 x main wiring harness
1 x steering vent
1 x air outlet pipe
1 x outlet pipe
1 x inlet pipe
1 x fuel pump
1 x oil pump cover
1 x diesel oil filter
1 x tubing
1 x fixing board
2 x fixing clamps
1 x white oil pipe
1 x air intake filter element
2 x small hose clamps
2 x large hose clamps
8 x cable ties
7 x bolts
12 x mini wiring hoop
5 x nuts
1 x Instruction Manual
1.When the product is used for the first time, it is necessary to pump the oil. After one and a half to two minutes of manual pumping, the hot air will come out after two or three minutes. After the hot air is out, it will take about ten seconds to reach what we want after adjusting temperature. The second and subsequent use of the product does not require pump oil, and it can be turned on directly. The hot air will come out in about two minutes after turning on the machine, and it will take about ten seconds after the hot air is out to reach the desired temperature.
2.After the product is turned off, a small fan starts to dissipate heat. When the product is just turned off, the internal temperature of the product reaches more than 200 degrees. When the fan cools down to 50 or 60 degrees, the product automatically shuts down and then you can cut off the power supply. Otherwise, it is easy to burn out the internal parts, and heat dissipation requires a process. The machine is actually still running.
3.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
4.Please allow 1-3cm differs due to manual measurement.