The diesel heater draw air from an external intake duct and into the combustion chamber. The air is then mixed with atomized diesel fuel for an internal combustion process that ignites the diesel and heats the surfaces of the heat exchanger. It is suitable for cars, trucks, RVs, trucks, construction vehicles, boats, RVs, buses.
1.High Quality Heater: This diesel air heater consumes 5KW power to immediately heat up your car. It can be used on cars with 12V or 24V Voltage. It can only start up with the diesel as the fuel, but it only makes low fuel consumption with 0.14-0.4L per hour.
2.4-Hole Design Fast Heating: The 4-hole design can better distribute the heat to different corners of the car. The 5KW motor can heat up the car in just several minutes. When the temperature is too high, it will automatically downshift. After the internal temperature return to normal, it will turn back to normal gear operation, safe operation.
3.Remote Control & LCD Display: Equipped with LCD display and remote control, you can adjust the temperature via the remote control or the LED monitor to warm up the car before getting in on a cold winter day.
4.Low Noise: The diesel heater is in a compact design and can be easily installed. Using the silent fan and the oil pump is made of upgraded low frequency pulse low vibration, effectively reduce noise. Keep the heater extremely quiet while running.
5.Easy to Operate: This type of heater is an all-in-one design, all components are fully assembled, and no additional installation is required. The vertical design will fit in the narrow place.
6.Wild Applications: Diesel air heaters can be used to heat the cabs of various diesel mechanical vehicles, such as cars, trucks, RVs, trucks, construction vehicles, boats, RVs, buses, etc.
Heater Power: 5KW
Rated Voltage: 12V/24V
Operating Voltage Range: 10-14.5V/20.5-28V
Rated Current: 2A
Starting Current: 8-10A (12V)/ 4-5A (24V)
Control: LCD display
Fuel Gasoline: Diesel
Tank Capacity: 5L
Outlet Hole: 4 holes
Fuel Consumption: 0.14-0.4(L/H)
Working Temperature: -40°C-80°C
Overheat protection: 240°C
Working altitude: ≤1500m
1 x heater
1 x silencer
1 x remote control
1 x air filter
1 x air outlet pipe
4 x outlet pipes
1 x inlet pipe
1 x fuel pump
1 x tubing
2 x fixing clamps
1 x air intake filter element
4 x small hose clamps
2 x large hose clamps
4 x bolts
4 x nuts
1 x Instruction Manual
1.When the product is used for the first time, it is necessary to pump the oil. After one and a half to two minutes of manual pumping, the hot air will come out after two or three minutes. After the hot air is out, it will take about ten seconds to reach what we want after adjusting temperature. The second and subsequent use of the product does not require pump oil, and it can be turned on directly. The hot air will come out in about two minutes after turning on the machine, and it will take about ten seconds after the hot air is out to reach the desired temperature.
2.After the product is turned off, a small fan starts to dissipate heat. When the product is just turned off, the internal temperature of the product reaches more than 200 degrees. When the fan cools down to 50 or 60 degrees, the product automatically shuts down and then you can cut off the power supply. Otherwise, it is easy to burn out the internal parts, and heat dissipation requires a process. The machine is actually still running.
3.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
4.Please allow 1-3cm differs due to manual measurement.